Outils pour utilisateurs

Outils du site


public:baiobox

Ceci est une ancienne révision du document !


Baiobox

Plusieurs bases sont a l'étude

Materiel EOL

Baiobox

Synthèse des spécifications

  • alim. externe pour 220V euro
  • DRAM 2-4GB DDR3 DRAM
  • CPU
  • 4 coeurs minimum
    • 64 bit et AES-NI
      • débit ≤ 500–700 Mbps : Celeron Gemini/Jasper‑Lake récent (ex. J4125/J4105/J3455, N5105)
      • débit >600–800 Mbps : Core i3
    • shared 2MB L2 cache acceptable
  • Storage
    • Boot depuis SD card (internal sdhci controller), external USB ou m.2 SATA
    • 1 M.2 SATA, longueur 2230/2242
    • SSD 120-240GB longueur correpondante
    • 1 slot M.2 2230 ( E‑Key PCIe x1/USB , compatible module Wi‑Fi AX200)
  • Réseau
    • 4 Gigabit Ethernet avec NIC opensource (Intel i211/i210) avec support multi queue MSI/MSI‑X
  • wifi
    • firmware libre : Atheros compatible ath9k (AR9285, AR9462) limite 802.11n.
    • firmware blob : Intel AX200 (wifi 6) ou QCA ath10k
    • connecteurs RP‑SMA (antennes externes pour performance)
    • 2x RP‑SMA 5 dBi omnidirectionnelles
  • I/O
    • 2 USB 3.0 external
    • LEDs facade avant
    • interrupteur ON/OFF
  • Firmware: coreboot si possible
  • Cooling : fanless

banana-pi-bpi-r3

  • Sd 32Go

banana-pi-bpi-r4

  • Sd 32Go

APU4

  • APU 4 - 4 GB AMD GX-412TC Quad core 1 GHz
  • CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
  • DRAM: 2 or 4 GB DDR3-1333 DRAM
  • Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express.
  • 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
  • Connectivity: 4 Gigabit Ethernet channels (Intel i211AT)
  • I/O: DB9 serial port, 2 USB 3.0 external + 2 USB 2.0 internal, three front panel LEDs, pushbutton
  • Expansion: 3 miniPCI express (J13 USB or mSATA, apu4*4: with SIM; J14 USB only, with SIM; J15: full miniPCI express, but no SIM, intended for wifi). GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD).
  • Board size: 6 x 6“ (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
  • Firmware: coreboot
  • Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).

APU6

APU6b4

  • CPU: AMD Embedded G series GX-412TC, 1 GHz quad Jaguar core with 64 bit and AES-NI support, 32K data + 32K instruction cache per core, shared 2MB L2 cache.
  • DRAM: 4 GB DDR3-1333 DRAM
  • Storage: Boot from SD card (internal sdhci controller), external USB or m-SATA SSD. 1 SATA + power connector. mSATA is shared with miniPCI express.
  • 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive
  • Connectivity: 1 SFP port (Gigabit, Intel i210IS), 3 Gigabit Ethernet channels (Intel i211AT)
  • I/O: microUSB serial port, 2 USB 3.0 external + 4 USB 2.0 internal, three front panel LEDs, pushbutton
  • Expansion: 3 miniPCI express (J14: full miniPCI express, but no SIM, intended for wifi), J13 USB only, with SIM for modem, J16 USB or mSATA, optional SIM); GPIO header, optional I2C bus, COM2 (3.3V RXD / TXD).
  • Board size: 6 x 6” (152.4 x 152.4 mm) - same as apu1d, alix2d13 and wrap1e.
  • Firmware: coreboot
  • Cooling: Conductive cooling from the CPU to the enclosure using a 3 mm alu heat spreader (included).

Qotom/Protectli

Sans wifi

  • Qotom Q355G4 / Qotom 4‑lan
public/baiobox.1771546878.txt.gz · Dernière modification : de pizzacoca